| LA1034 LogicPort Specifications and Characteristics |
| Sampled channels: 34 |
| Timing mode sample rate: 1KHz to 500MHz (uses internal clock) |
| State mode sample rate: 0 to 200MHz (clock provided by circuit under test) |
| Sample buffer: 34 x 2048 samples |
| Maximum sample compression: 2^33 to 1 (sample rates to 200MHz) |
| Trigger sequencer: 250MHz max, 4ns minimum pulse width |
| Trigger event counters: 20 bits, range 1 to 1,048,576 for each trigger level |
| Input impedance: 200K Ohms, paralleled by <5pF |
| Frequency counter range: 300MHz with 10Hz resolution, 4 channels |
| Threshold range: adjustable +6 to -6 volts with 50mv resolution |
| Threshold accuracy: +/-(100mV + 5% of setting) |
| Channel to channel skew: 0.6ns typical, 1.0ns max |
| State mode Setup/Hold times: 2.0/0ns, window adjustable +/-2.5ns |
| Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @150MHz, 0.8Vpp @250MHz |
| Input dynamic range: 10 volts peak-peak |
| Maximum input: +/-40 volts DC, 15 volts peak-peak pulse amplitude |
| Timebase accuracy: +/-0.005% over full temperature range |
Input Probe: Teflon insulated leads terminated with female contacts
compatible with 0.025"-0.030" round or square pins. |
| Power supply current: 200 milliamps max (supplied by USB) |
| Temperature range: operating +5 to +50C, storage -10 to +65C |
| Minimum system requirements: |
| Pentium II or better (400MHz or faster recommended) |
| 32MB available memory |
| 20MB available disk space |
| 800 x 600 (1024 x 768 recommended) standard DPI display |
| USB 1.1 or 2.0 port |
| The LA1034 is compatible with the following operating systems: |
| Windows 98 |
| Windows 98 Second Edition |
| Windows ME |
| Windows 2000 |
| Windows XP Home and Professional Editions (32 bit versions) |
| Windows Vista (32 bit versions) |
| |
| Specifications subject to change without notice |